ClinchPartner, Inc.

Power Tools for Fastener-Less Assembly

Optimally mobile clinching tools 

In order to meet the requirement of optimum mobility, ClinchPartner, Inc. has developed a family of clinching power tools, notably the ClinchMaster MX4 product line.

ClinchMaster MX4 can be used cordless, using powerful Li-Ion batteries, giving the operator total and unrestricted mobility.

ClinchMaster MX4 can also operate with a Power Supply unit, slotted into the battery socket and connected to the mains through a power cord. Both 110 V and 230 V versions are available.
Prime target applications include internal partition and curtain walls, suspended ceilings. modular structures of various kinds, solar panel racks, HVAC, roof jobs, installation tasks and generally speaking for joining sheets and profiles on-site or off-site.

ClinchMaster MX4

ClinchMaster MX4 is a high-performance, yet low weight cordless clincher. The core of the unit is an advanced electro-hydraulic drive featuring 14.4 V Li-Ion technology, supplying a clinching force around 60 kN.

The weight of the drive is a mere 5.3 lbs, 2.4 kg, including a 1.65 Ah battery. A rapid charger, 110 V or 230 V will load the battery fully in one hour.
Additional batteries 3.2 Ah available.

As the unit will have capacity for making 200-350 clinch joints on a battery load, it will be possible to work more or less uninterrupted by swapping between one battery on the charger and one on the tool.

For more systematic in-factory use, the unit can be equipped with an optional Power Supply for 110 V and 230 V, slotting into the battery socket and connected to the mains.

ClinchMaster features optimum cycle control with automatic return after finished clinching cycle, but allows manual override at any point in time.

A variety of clinching tongs including punch-and-die sets adapted to the thickness of the material to be clinched is available. 

ClinchMaster MX4 comes in a sturdy metallic case with space for the drive unit, up to four additional tongs, charger, additional battery.

The tongs as well as the punch-and-die sets are patented or patents pending.

Specifications approximate and subject to change without prior notice.

Wide variety of quick-change clinching tongs

The T25 series have a depth of bite of 1”, 25 mm, and open about 1", 25 mm

The T45 series is intended for cases when additional reach is required. The T45 tongs have a depth-of-bite of 1 3/4", 45 mm, and open 1 1/4", 32 mm

The O40 series tong is particularly rigid and features a 1 9/16", 40 mm, circular window

The Tong T1 aims at light gauge sheets with thickness in the range 2x24ga-2x22ga, 2x0.5-2x0.8 mm

The Tong T2 is foreseen for thicknesses in the range 2x20ga-2x18ga, 2x0.8-2x1.3 mm

The Tong T3 is for light load bearing structures in the range around 2x16ga, 2x1.3-2x1.6 mm

The Tong T4 is for medium load bearing structures in the range around 2x14ga, 2x1.6-2x2.0 mm

Special tongs are available for thicker material

Tongs are closed at rest for operator safety and open manually to allow straddling of flanges and return lips.

All tongs have a weight of around 2.5 lbs, 1.15 kg and they pivot around the drive unit axis by +/- 180 degrees for user convenience.

Changing the clinching tong is a simple snap-out, snap-in process, taking less than 5 seconds.
The clinching cycle takes about 3 seconds.

T25 tong (upper) T45 tong (lower)
O40 Tong with sturdy circular window
Adapted end-stops facilitate precise positioning
MX4 equipped with T45 tong
Optional Power Supply for slotting into the battery socket
Tongs swivel +/- 180 degrees for easy access
T45 tong opening wide to straddle flanges
Changing tongs is a simple snap-out/snap-in
Sturdy metallic case with room for extra battery, charger, tongs and Power Supply